The flue system selected was a stainless steel fully welded twin wall 4 hour fire rated system with 30mm insulation.Airtherm provided a cost-efficient solution for the client and furthermore we exceeded their expectations when our tender was some margin under the original budget offered by the Hamworthy flue division.
The flue system installed comprised of a 2.5m horizontal run and a 3m vertical, incorporating the necessary drains to allow any unwanted condense to evacuate the system.
Consultant
Worcestershire Council
Client
EMS
Sector
Education
Products
MasterFlue System
Equipment
Hamworthy PV110c
Application
Condensing
Boilers: Hamworthy
Model: Modumax Variheat PV110c
Application: Chimney / Flue system
Operating mode: Wet
Pressure: Negative / positive pressure
Working pressure: 200 Pa (product will operate 1000pa max)
Inner wall: 316L1.4404/1.457 thickness ≤ Ø250 0,4 mm
Outer wall: AISI 304/ 1.4301 thickness 0,5 / 0,6 mm
Insulation: 30mm thick Rockwool insulation
Sealant: Tri-lip 'o' type silicone ring
Fuel type: Gas
Other Applications for METALOTERM MasterFlue
Condensing boilers
Atmospheric gas-fired boilers
Gas blown boilers
Industrial ovens, large-scale establishments
Wood-fired stoves
Other Advantages of METALOTERM MasterFlue
No terminal bridges, better heat protection
High-temperature silicone sealing ring
Fast-build system without the need of sealants
High quality insulation uninterrupted from base plate to top stub
www.airtherm.co.uk
0 comments:
Post a Comment